Using Vera to control X-10 Wireless RF, Blind & Shade Controllers for Vera using X-10

Facebooktwittergoogle_plusredditpinterestlinkedinmailFacebooktwittergoogle_plusredditpinterestlinkedinmail

The title of today’s post is really two separate subjects but because they were both intermingled together with what I was doing at the time, I am presenting them in one post, as thats how this whole issue came together for me.

 

The first part of the title, “Using Vera to control X-10 Wireless RF”, was the result of some research I had been doing to help out a fellow redditor on the subreddit I am a moderator on, the Home Automation Sub on Reddit.com.  He had a few X-10 door and window sensors in his home but did not use powerline X-10 devices so was limited to X-10 Wireless RF signals.  He bought a VeraLite and was hoping to use Vera to control his X-10 via a CM15A Transceiver/Controller. The Mi Casa Verde Forums had a number of threads relating to this issue such as Plugin for cm15a/cm19a X10 Controllers, and X10 RF devices? but really no standup solution, hence he turned to the Home Automation Sub-Reddit hoping for some answers.  After a week or so, I came to the following conclusions;

 

My research tells me that either the EZX10RF from Smartenit for about $120 or the RFXCOM RFXtrx315 USB 315MHz Transceiver  for about $165 USD would seem to be the way to go for getting Vera to accept and understand X-10 RF signals.  There was some information, as per the links above regarding plug-ins for Vera on the MCV forums, but unless you know something about Linux OS (which I do not) there doesn’t seem to be an alternative to what they are suggesting with either the CM15/CM19 and linux or pogoplug, other than the EZX10RF or the RFXCOM units.  The CM15A/CM19A plug-in would probably be the cheapest but to me not the easiest nor the cleanest if you need to run Linux to do it.

 

Now the second part of the title, “Blind & Shade Controllers for Vera using X-10” came about as I was researching the first part.  I came across a company that I had heard of in the past but had forgotten about called RollerTrol, and I thought some of you Vera users might find some interest in them and their products. They have some unique products, specifically geared to shade motors and blinds and they are where I first came across the X-10 transceiver from RFXCOM that allows you to use X-10 RF directly with Vera via a plug-in. I am not totally familiar with it yet but would be interested to know if anyone else is, and what their experience is with any of the RollerTrol products.

 

They also have a really great webpage on their site, called “Vera And VeraLite Are Powerful Controllers For Blinds & Shades”  that is a series of articles or step-by-step procedures on how to use their shade and blind motors with the RFXCOM transceiver and then hook it all up to a Vera Controller.  Seems like there may be a lot of potential for some of their devices.

 

Let me know what you think. Btw, we sell Vera for a lot cheaper than RollerTrol does!  We have them on sale for 10% off right now, here is a coupon if you need one.

 

Kelly R. Foster – HA World

Tagged , , , , , , , , , , , . Bookmark the permalink.

Leave a Reply