Vera Edge and the newer Gen5 devices from Aeon Labs, the SS6, MS6 and RGBW

Facebooktwittergoogle_plusredditpinterestlinkedinmailFacebooktwittergoogle_plusredditpinterestlinkedinmail
VeraEdge Z-Wave Home Controller

VeraEdge Z-Wave Plus Home Controller

Aeon Labs SS6 packaging 1000x1000

Aeon Labs Z-Wave Plus Smart Switch 6 – Model ZW096-ZWUS

Aeon Labs MS6 packaging 1000x1000

Aeon Labs Z-Wave Plus MultiSensor 6 – Model ZW100-ZWUS

aeon labs led bulb zw098 packaging 1000x1000

Aeon Labs Z-Wave Plus RGBW LED Bulb 9W (70W) Model ZW098-ZWUS

 

 

 

 

 

 

We have been working with Aeon Labs and Vera Controls for the past few weeks to figure out why the Aeon Labs Multisensor6, the Smart Switch 6 and the RGBW LED bulbs are having so many problems working with the VeraEdge, a Zwave Plus controller with the same series 500 chip as all Gen5 devices.

Yesterday, Vera Controls revealed that VeraEdge is not yet compatible with any of the new Gen5 devices from Aeon Labs, the aforementioned 3 products.  They are aware of the problem and are working on a new firmware update which is supposed to solve the problems.  We wanted to give all you Vera users a heads up in case you were also having issues as well.

We have tested all 3 Aeon Labs products on Fibaro HCLite, ISY994iZW/PRO IR, CastleOS, Gateway 3.0 from IpDatatel to date, and no issues whatsoever so it is clearly a Vera problem, not the devices.

Anyways, just wanted you all to know!  We will update this post as we get more info on the firmware upgrade, but please also check your Vera’s for it as well.

Have a great day, and thanks for letting us “automate YOUR world!”

Kelly R. Foster – HA World

Adding Aeon Labs Gen5 Z-Wave Plus devices (SS6 & HD Switch) to Vera UI5 controllers, VeraLite/Vera3

Facebooktwittergoogle_plusredditpinterestlinkedinmailFacebooktwittergoogle_plusredditpinterestlinkedinmail
Aeon Labs Z-Wave Plus Smart Switch 6 - Model ZW096-ZWUS

Aeon Labs Z-Wave Plus Smart Switch 6 – Model ZW096-ZWUS

Mi Casa Verde VeraLite Z-Wave Home Controller

Mi Casa Verde VeraLite Z-Wave Home Controller

If any of you have been having trouble adding Gen 5 (aka Z-Wave Plus Series 500 chips) devices to their Veralite or Vera3 Controllers running UI5, we discovered a workaround that we hope you will find useful!

This method “should” work for many Gen5 devices, it is purported to work with the Aeon Labs Heavy Duty Switch according to Vesternet, although we only tested it out specifically for the Aeon Labs Smart Switch 6, Model ZW096.  We are currently testing a Gen5 Recessed door sensor as well, but since z-wave sensors are a different class of device, we will deal with them in a future post.

So here is a step-by-step procedure to get the SS6 working in your VeraLite (should work for a Vera3 as long as you have UI5);

  1. Check that you have the upgraded firmware, which should be V1.5.622 according to the VeraLite GUI.  Go to “SETUP” < “Firmware” to find your version, give it a bit of time it takes a few minutes for it to come up.  When it does, you should have that version, if you don’t – upgrade it automatically and go to Step 2.  Always remember to back up first prior to a firmware upgrade!
  2. Now that you are up -to-date, you have to download and install yet another, different, later version of firmware, V1.5.672.  That version, as I understand it, was implemented by Vera to work for the newer Z-Wave devices coming out with Z-wave Plus.  It is unsupported as UI5 is actually dead but regardless, you need V1.5.672 in order to proceed.  Download it here or simply copy the URL, http://download.mios.com/rt3662_betafirmware/rt3662_Luup_ui5-1.5.672-en-mios.squashfs, into the form in your “Firmware” page and download it.  Follow the instructions and once its complete, carry on to Step 3.
  3. Include the device, it should come up in the GUI as an appliance module.  At this point, providing it was included properly, nothing will work – yet.  You can toggle the control on and off within Vera and the icon will show lighting up or not, but the load won’t come on.  Thats what has to be fixed in the following steps.
  4. Next  you have to create a scene in order to control it from within Vera.
    • I am not going to go into the details as to why this is, but it does work!
    • So, create a new scene for the SS6, but you are not going to create the trigger the normal way.  You will be using the “LUUP Tab” to enter in some Lua code as your trigger.  Carry on with Step 5.
  5. Copy and paste the following line of code into the Luup box in the “LUUP Tab”…
    • luup.call_action(‘urn:micasaverde-com:serviceId:ZWaveNetwork1′,’SendData’,{Node=’88’,Data=’37 1 255′},1)
    • Note the following in the curly brackets at the end…Node refers to the Node ID which you need to get from the “Settings” tab of the SS6 device window – not the Device # but the ID number shown below the “Variables” section.  The other variables – leave them alone, again I am not going to explain further in the interests of simplicity.
  6. Save the lua code, confirm changes and Save.
  7. Next you need an “Off” scene, so repeat steps 4 & 5, but you need a different script for the Off scene, here it is…
    • luup.call_action(‘urn:micasaverde-com:serviceId:ZWaveNetwork1′,’SendData’,{Node=’88’,Data=’37 1 0′},1).  Remember to change the node ID to your devices ID.
  8. Once Vera has finished and all is good test the scenes to make sure they work.  The scenes should now give you manual control of your SS6from within Vera.
  9. There you go, a fairly straight forward workaround using scenes and triggers as opposed to direct command control.

That should be it.  Hope this has helped you!  Credit goes to Vesternet and to the Vera Forums for the technical Z-Wave configuration and the Luaa code, I simply wanted to clarify and consolidate the entire process for anyone with this issue, as I had quite a time trying to find this information, so here it is in one simplified place.  For more specific info, here are the links we used…

http://www.vesternet.com/resources/application-notes/apnt-89

http://forum.micasaverde.com/index.php/topic,28692.0.html

http://forum.micasaverde.com/index.php?topic=27870.0

http://forum.micasaverde.com/index.php?topic=14492.0

Have a great day, and thanks for letting us “automate YOUR world!”

Kelly R. Foster – HA World

Using Linear Z-Wave dimmer switches with dimmable LED’s

Facebooktwittergoogle_plusredditpinterestlinkedinmailFacebooktwittergoogle_plusredditpinterestlinkedinmail

Everybody these days is concerned about energy conservation, not only for a green planet but also in their own homes.  One of the easiest things you can do to conserve energy in your home, is convert your existing light bulbs from the horribly inefficient incandescent light bulbs to LED’s or CFL’s.

I have been getting a lot of questions lately regarding the use of LED bulbs with Z-Wave dimmer switches, so I wanted to post some of the results of some tests that I completed recently in my office to help those of you with questions on where to start and what type of bulb and switches to use.  I will expand more in future posts on additional bulbs and switches, but for now I am posting the results of my tests using three common brands of dimmable LED’s (yes you DO need to use “dimmable” LED’s) wired into circuits being controlled by a Z-Wave dimmer switch, Model WD500Z-1 by Linear Corp.

Here are the results of my tests…

1) Cree 6W Dimmable LED (450 Lumens)

– Dimming steps good.

– Dims full on/off (0-100%) nice and smooth

– Resume dim good.

– no discernible noise

– no flicker but hard to control on lower spectrum of wattage (close to off or 5-10%)

2) Philips 8W Dimmable LED (470 Lumens)

– Dimming steps good.

– Dims full on/off (0-100%) nice and smooth

– Resume dim good.

– no discernible noise

– no flicker

– Good control at all dim levels.

3) EcoSmart 9W Dimmable LED (650 Lumens)

– Dimming steps good.

– Dims full on/off (0-100%) nice and smooth

– Resume dim good.

– no discernible noise

– no flicker

– Good control at all dim levels.

Now there is no guarantee that buying these brand of bulbs and these switches will absolutely work for you in your environment, as every home is wired differently and may have other mitigating circumstances, but at least this is something for you to start with. I would recommend that you get one switch and one LED dimmable bulb and hook everything up properly then test to see if it works for you in your home environment and that you are happy with how the bulb and switch work together and with their performance.

These tests were done on my test bench in my office under perfect conditions, I did not do anything but wire up the switches and screw in the LED’s. I have a VeraLite controller as well as HomeSeer but did not set them up within either controller as I wanted an unrestricted unbiased test using a standard GE Z-Wave remote controller and/or and Aeon Labs Minimote, so those were what I used for my tests. That’s not to say you couldn’t improve the step rates and presets with Vera or another controller to improve the performance even more, as I am sure you could.  Also, the more load you add to your final circuit – ie: the more LED bulbs – the better the performance will most likely be as I only used one bulb as noted in each test above to ensure I was giving you tests based upon the worst case scenario. More often than not, multiple bulbs with a total higher load (usually above 40 Watts) than what I used will afford better results and improved dimming than a lower load like I used.  Again, please follow my advice and conduct some tests on your own before going out and buying dozens of bulbs and a bunch of switches only to find out later that they do not work very well in your home.

Good luck on your fight to save the planet and stay tuned for more test results in future posts!  Thanks for letting us “automate YOUR world”!

Kelly R. Foster – HA World

 

Using Vera to control X-10 Wireless RF, Blind & Shade Controllers for Vera using X-10

vera3 veralite x10
Facebooktwittergoogle_plusredditpinterestlinkedinmailFacebooktwittergoogle_plusredditpinterestlinkedinmail

The title of today’s post is really two separate subjects but because they were both intermingled together with what I was doing at the time, I am presenting them in one post, as thats how this whole issue came together for me.

 

The first part of the title, “Using Vera to control X-10 Wireless RF”, was the result of some research I had been doing to help out a fellow redditor on the subreddit I am a moderator on, the Home Automation Sub on Reddit.com.  He had a few X-10 door and window sensors in his home but did not use powerline X-10 devices so was limited to X-10 Wireless RF signals.  He bought a VeraLite and was hoping to use Vera to control his X-10 via a CM15A Transceiver/Controller. The Mi Casa Verde Forums had a number of threads relating to this issue such as Plugin for cm15a/cm19a X10 Controllers, and X10 RF devices? but really no standup solution, hence he turned to the Home Automation Sub-Reddit hoping for some answers.  After a week or so, I came to the following conclusions;

 

My research tells me that either the EZX10RF from Smartenit for about $120 or the RFXCOM RFXtrx315 USB 315MHz Transceiver  for about $165 USD would seem to be the way to go for getting Vera to accept and understand X-10 RF signals.  There was some information, as per the links above regarding plug-ins for Vera on the MCV forums, but unless you know something about Linux OS (which I do not) there doesn’t seem to be an alternative to what they are suggesting with either the CM15/CM19 and linux or pogoplug, other than the EZX10RF or the RFXCOM units.  The CM15A/CM19A plug-in would probably be the cheapest but to me not the easiest nor the cleanest if you need to run Linux to do it.

 

Now the second part of the title, “Blind & Shade Controllers for Vera using X-10” came about as I was researching the first part.  I came across a company that I had heard of in the past but had forgotten about called RollerTrol, and I thought some of you Vera users might find some interest in them and their products. They have some unique products, specifically geared to shade motors and blinds and they are where I first came across the X-10 transceiver from RFXCOM that allows you to use X-10 RF directly with Vera via a plug-in. I am not totally familiar with it yet but would be interested to know if anyone else is, and what their experience is with any of the RollerTrol products.

 

They also have a really great webpage on their site, called “Vera And VeraLite Are Powerful Controllers For Blinds & Shades”  that is a series of articles or step-by-step procedures on how to use their shade and blind motors with the RFXCOM transceiver and then hook it all up to a Vera Controller.  Seems like there may be a lot of potential for some of their devices.

 

Let me know what you think. Btw, we sell Vera for a lot cheaper than RollerTrol does!  We have them on sale for 10% off right now, here is a coupon if you need one.

 

Kelly R. Foster – HA World

Controlling X-10 devices with a VeraLite from Mi Casa Verde using IR and a USB-UIRT

Facebooktwittergoogle_plusredditpinterestlinkedinmailFacebooktwittergoogle_plusredditpinterestlinkedinmail

Very cool project I just completed yesterday as a result of doing some homework for a customer of mine relating to the use of IR through my Mi Casa Verde Veralite Z-Wave Controller/Gateway (click that link if you need a VeraLite, we are having a 10% off sale on both them and the Vera3 right now!)

In a nutshell, what I managed to do was to be able to control my X-10 devices by transmitting X-10 signals through my USB-UIRT which was plugged into the Veralite, into a 3rd party version of the old, discontinued IR-543 which I had kicking around for testing IR devices that we sell in one of our stores.  Worked great!

Normally you would need an Insteon Modem 2413U that you plug into the VeraLite and then configure it to work as an Insteon controller and send Insteon commands.  This also would allow you to control X-10 devices because Insteon is backwards compatible with X-10.  These cost about $80 on Amazon or directly from Smarthome.  What I did eliminated the need for the 2413U modem in my setup because I already use a number of IR-543’s with my universal remotes to control X-10 lights and appliances.  When I started trying to get the IR working on Vera I noticed that there was an IR command set for X-10.  I wondered if it might be similar to the IR codesets that universal remotes use within the auxiliary mode to send X-10 commands over IR.  Low and behold, that is exactly what it seemed to do!  I used the built-in virtual remote keypad inside the Vera, dialed in my house code on the IR-543, punched in the unit code inside Vera and A-1 was up and running!  A-2 was another keypunch away and that was all I needed to know.  Now for some more testing to see what else I can do with it!

Oh, btw, It also allowed me to control X-10 from my Android smartphone using the Vera Mobile app I had already installed!  Worked exactly the same as the Vera Internet GUI on my PC!  More software apps for Vera also available on our Home Automation Software page.

Very cool learning day!  Can’t wait to experiment with Z-wave scene now and using IR commands to control A/V devices as scenes triggered from z-wave events.  More to come on that as well.

Kelly R. Foster – HA World

Using Leviton 2-Wire Z-Wave dimmer switches with dimmable LED’s

Facebooktwittergoogle_plusredditpinterestlinkedinmailFacebooktwittergoogle_plusredditpinterestlinkedinmail

One of the easiest things you can do to conserve energy in your home, is convert your existing light bulbs from the horribly inefficient incandescent light bulbs to LED’s or CFL’s.

Here are some more test results using Dimmable LED bulbs with Z-Wave dimmer switches, specifically using four common brands of dimmable LED’s wired into circuits being controlled by a Z-Wave dimmer switch, Leviton Vizia RF – Model VRI06.  Now the results  are not that great as this is a two-wire dimmer but here goes nonetheless.  Maybe these results will help someone who cannot use a 3-wire dimmer if they do not have neutrals pulled into their switch boxes.

Here are the results of my tests…

1) Cree 6W Dimmable LED (450 Lumens)

– Dimming steps good.

– Dims full off ok but brightening to 100% requires holding the dimmer on for a while longer than normal to get to 100%, otherwise it is fine as far as smoothness goes.

– Resume dim good.

– no discernible noise or humming

– no flicker but hard to control on lower spectrum of wattage (close to off or 5-10%)

2) Philips 8W Dimmable LED (470 Lumens)

– Dimming steps good.

– Dims full off ok but brightening to 100% requires holding the dimmer on for a while longer than normal to get to 100%, otherwise it is fine as far as smoothness goes.

– Resume dim good.

– no discernible noise or humming

– no flicker but hard to control on lower spectrum of wattage (close to off or 5-10%)

– overall the same performance as the Cree above, except it seemed like the dimming steps were somewhat smoother.

3) EcoSmart 9W Dimmable LED (650 Lumens)

– Dimming steps a little rough.

– Dims only to 20% and flickers slightly, you need to hold the dimming a second for full off. Brightening to 100% requires holding the dimmer on for a while longer than normal to get to 100%.

– Resume dim good at only >40%.  Doesn’t seem to work at all below that.

– no discernible noise or humming

3) GE 11W Dimmable LED (800 Lumens)

– Dimming steps OK.

– Dims only to 30% then you need to hold the dimming a second for full off. Will not dim up from off, Brightening to 100% ok only after being switched on, THEN dimmed up.

– Resume dim is good.

– no discernible noise or humming

– Very little flicker if any and good control at all levels.

Now there is no guarantee that buying these brands and these switches will absolutely work for you in your environment, as every home is wired differently and may have other mitigating circumstances, but at least this is something for you to start with. I would recommend that you get one switch and one LED dimmable bulb and hook everything up properly then test to see if it works for you in your home environment.

These tests were done on my test bench in my office under perfect conditions, I did not do anything but wire up the switches and screw in the LED’s. I have a VeraLite controller as well as HomeSeer but did not set them up within either controller as I wanted an unrestricted unbiased test using a standard GE Z-Wave remote controller and an Aeon Labs Minimote, so those were what I used for my tests. That’s not to say you couldn’t improve the step rates and presets within Vera to improve the performance even more, as I am sure you could.

Kelly R. Foster – HA World

Using Evolve Z-Wave dimmer switches with dimmable LED’s

Evolve LRM-AS Z-Wave LED & CFL Dimmer Switch
Facebooktwittergoogle_plusredditpinterestlinkedinmailFacebooktwittergoogle_plusredditpinterestlinkedinmail

Everybody these days is concerned about energy conservation, not only for a green planet but also in their own homes.  One of the easiest things you can do to conserve energy in your home, is convert your existing light bulbs from the horribly inefficient incandescent light bulbs to LED’s or CFL’s.

I have been getting a lot of questions lately regarding the use of LED bulbs with Z-Wave dimmer switches, so I wanted to post some of the results of some tests that I completed recently in my office to help those of you with questions on where to start and what type of bulb and switches to use.  I will expand more in future posts on additional bulbs and switches, but for now I am posting the results of my tests using three common brands of dimmable LED’s (yes you DO need to use “dimmable” LED’s) wired into circuits being controlled by a Z-Wave dimmer switch, Model LRM-AS by Evolve Guest Controls.

Here are the results of my tests…

1) Cree 6W Dimmable LED (450 Lumens)

– Dimming steps good.

– Dims full on/off (0-100%) nice and smooth

– Resume dim good.

– no discernible noise

– no flicker but hard to control on lower spectrum of wattage (close to off or 5-10%)
2) Philips 8W Dimmable LED (470 Lumens)

– Dimming steps good.

– Dims full on/off (0-100%) nice and smooth

– Resume dim good.

– no discernible noise

– no flicker

– Good control at all dim levels.

3) EcoSmart 9W Dimmable LED (650 Lumens)

– Dimming steps good.

– Dims full on/off (0-100%) nice and smooth

– Resume dim good.

– no discernible noise

– no flicker

– Good control at all dim levels.

Now there is no guarantee that buying these brands and these switches will absolutely work for you in your environment, as every home is wired differently and may have other mitigating circumstances, but at least this is something for you to start with. I would recommend that you get one switch and one LED dimmable bulb and hook everything up properly then test to see if it works for you in your home environment.

These tests were done on my test bench in my office under perfect conditions, I did not do anything but wire up the switches and screw in the LED’s. I have a VeraLite controller as well as HomeSeer but did not set them up within either controller as I wanted an unrestricted unbiased test using a standard GE Z-Wave remote controller and an Aeon Labs Minimote, so those were what I used for my tests. That’s not to say you couldn’t improve the step rates and presets within Vera to improve the performance even more, as I am sure you could.

Good luck on your fight to save the planet and stay tuned for more test results in future posts!  Thanks for letting us “automate YOUR world”!

Kelly R. Foster – HA World

What is Home Automation – Applications of Z-Wave (Blog Post 6)

Facebooktwittergoogle_plusredditpinterestlinkedinmailFacebooktwittergoogle_plusredditpinterestlinkedinmail

Hi and welcome back to the HA World Online Blog!

To continue the story of my foray into HA, last time I was humming and hawing over the cost and labor of all this new wiring to add in these new lights for my remodel. Over the next day or two, I happened to read an article in a magazine I had just subscribed too. It was an article in “Old-House Journal” magazine about how Black and Decker was getting into the remote lighting control market with a new product they called the “Freewire” system. These devices were supposed to be able to give you remote control over plug-in lights and appliances, no wiring needed!

Wow, I thought, wouldn’t that be a great solution to my problem. A subsequent advertisement in the magazine said that the Freewire products were supposed to be sold at Home Depot – so I headed to my local store to check them out. However, to my chagrin the salespeople at Home Depot did not know anything about the product, except for one fellow who told me about a company he had heard of that made something similar called “smarthome” products. He told me to google the word “smarthome” on the Internet which I did and as I am sure most of you have already guessed what came up, was, you got it – Smarthome. The next day I called up their customer service department, learned a bit about “X-10” and had an inline module, a transceiver and a wireless wall switch on order.

Bottom line is this, I never did have to run that crazy amount of switch leg wiring, in fact, I installed another pair of lights (dialed into a different unit code of course) and used X-10 to control both pairs of my new lights, remotely and very easily!

That was my first experience with home automation and remote lighting control.  In this instance I used X-10 instead of Z-Wave. Each of the different protocols have quite a few similarities, you just use combinations of the appropriate devices to solve similar problems. There are even bridges between some of these different technologies, HomeSeer and Mi Casa Verde each make a software solution, and nowadays there are becoming alot more options in terms of a central controller or gateway that can “talk” to all the protocols, but that’s a topic for another day, and, although I do want to get into the differences between each of these protocols, for the next couple posts I want to delve into some of the more common applications of the Z-Wave protocol.

Please join us next time as we do just that, we look forward to having you as a reader and as always, thank you for letting us “automate YOUR world”.  Please also visit our store for great deals on Z-Wave and X-10 products.  Oh btw, we are running a great sale on the MiCasa Verde Z-Wave, Insteon & X-10 Home Controllers right now, just click on either the following  links, Vera3 or VeraLite, and you will go direct to the product page for each of them – the coupon code for 10% off is added automatically, free shipping too!  All you have to do is pay!

Kelly R. Foster – HA World