Z-Wave, Zigbee, Lutron Caseta, X-10 & Insteon 220VAC High Voltage Device Control

Facebooktwittergoogle_plusredditpinterestlinkedinmailFacebooktwittergoogle_plusredditpinterestlinkedinmail

 

Z-Wave remote control & monitoring of 240VAC devices. Great for water heaters, high voltage lighting, pool pumps and appliances, motors up to 5HP

Image courtesy of haworldonline.com

Aeon Labs Z-Wave Dry Contact Sensor

Facebooktwittergoogle_plusredditpinterestlinkedinmailFacebooktwittergoogle_plusredditpinterestlinkedinmail

This simple sensor provides a wiring terminal to accept any dry contact sensor with wire measuring from 18AWG to 20AWG. Its perfect for adding Z-Wave communication to wired water level sensors, dry contact switches and relays, and other dry contact devices. Simply press and hold the button, insert the external sensors wires (may require stripping), and then release the button to clamp the wires.

Image courtesy of haworldonline.com

Aeon Labs Z-Wave Z-Stick Gen5 USB Controller

Facebooktwittergoogle_plusredditpinterestlinkedinmailFacebooktwittergoogle_plusredditpinterestlinkedinmail

Simply plug the stick into an open USB port and start adding Z-Wave devices! The stick is meant primarily to allow a host processor to control Z-Wave devices using the Z-Wave technology protocol all the while simplifying Z-Wave network installation.

Image courtesy of haworldonline.com

Aeon Labs to Show Four New Devices at ISE 2016

Facebooktwittergoogle_plusredditpinterestlinkedinmailFacebooktwittergoogle_plusredditpinterestlinkedinmail

Aeotec_logo

With a decades experience in designing and manufacturing connected-home accessories, Aeon Labs continues to set its sights on responding to evolving industry needs. This year the company will use its presence at ISE 2016 in Amsterdam to highlight 4 new Z-Wave devices each crafted to cater to distinct, emerging consumer trends. Connected home lighting technology typically means replacing either a light bulb or a wall switch.

Image courtesy of z-wavealliance.org

Aeon Labs Responds to Increasing Connected Home Demand With 4 New Z-Wave Devices

Facebooktwittergoogle_plusredditpinterestlinkedinmailFacebooktwittergoogle_plusredditpinterestlinkedinmail

<img class="alignleft wp-image-5322" src="http://z-wavealliance.org/wp-content/uploads/2014/09/Aeotec_logo1-150×150.jpg" sizes="(max-width: 150px) 100vw, 150px" srcset="http://z-wavealliance.org/wp-content/uploads/2014/09/Aeotec_logo1-150×150.jpg 150w, http://z-wavealliance.org/wp-content/uploads/2014/09/Aeotec_logo1-100×100.jpg 100w, http://z-wavealliance.org/wp-content/uploads/2014/09/Aeotec_logo1-160×160.jpg 160w, http://z-wavealliance.org/wp-content/uploads/2014/09/Aeotec_logo1.jpg 206w" alt="Aeotec_logo" width="403" height="403" />
<blockquote class="curated_content">With a decades experience in designing and manufacturing connected-home accessories, Aeon Labs continues to set its sights on responding to evolving industry needs. Connected home lighting technology typically means replacing either a light bulb or a wall switch. The retrofit solution was designed to be installed in less than 5 minutes and blends control and dimming with reliable power metering measurements.</blockquote>

Vera Edge and the newer Gen5 devices from Aeon Labs, the SS6, MS6 and RGBW

Facebooktwittergoogle_plusredditpinterestlinkedinmailFacebooktwittergoogle_plusredditpinterestlinkedinmail
VeraEdge Z-Wave Home Controller

VeraEdge Z-Wave Plus Home Controller

Aeon Labs SS6 packaging 1000x1000

Aeon Labs Z-Wave Plus Smart Switch 6 – Model ZW096-ZWUS

Aeon Labs MS6 packaging 1000x1000

Aeon Labs Z-Wave Plus MultiSensor 6 – Model ZW100-ZWUS

aeon labs led bulb zw098 packaging 1000x1000

Aeon Labs Z-Wave Plus RGBW LED Bulb 9W (70W) Model ZW098-ZWUS

 

 

 

 

 

 

We have been working with Aeon Labs and Vera Controls for the past few weeks to figure out why the Aeon Labs Multisensor6, the Smart Switch 6 and the RGBW LED bulbs are having so many problems working with the VeraEdge, a Zwave Plus controller with the same series 500 chip as all Gen5 devices.

Yesterday, Vera Controls revealed that VeraEdge is not yet compatible with any of the new Gen5 devices from Aeon Labs, the aforementioned 3 products.  They are aware of the problem and are working on a new firmware update which is supposed to solve the problems.  We wanted to give all you Vera users a heads up in case you were also having issues as well.

We have tested all 3 Aeon Labs products on Fibaro HCLite, ISY994iZW/PRO IR, CastleOS, Gateway 3.0 from IpDatatel to date, and no issues whatsoever so it is clearly a Vera problem, not the devices.

Anyways, just wanted you all to know!  We will update this post as we get more info on the firmware upgrade, but please also check your Vera’s for it as well.

Have a great day, and thanks for letting us “automate YOUR world!”

Kelly R. Foster – HA World