Linear Z-Wave 3-Way On/Off Switch Kit

Facebooktwittergoogle_plusredditpinterestlinkedinmailFacebooktwittergoogle_plusredditpinterestlinkedinmail

The Linear Z-Wave 3-Way On/Off Switch Kit includes one primary or master on/off relay switch (load bearing) and one accessory switch (non-load bearing aka remote/slave) to allow control of one light from two different locations. Each switch replaces your current 3-way light switch, so you can use your existing wiring (neutrals are required) and provide Z-Wave wireless and manual control of overhead lighting from multiple locations.

Once connected to the load bearing switch, your lights can be turned on or off with a Z-Wave controller up to 100 feet away within line of site. The On/Off switch kit integrates with other Z-Wave enabled products via your Z-Wave controller, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range). Standard white decora Wallplates are included in each box for each model.

Image courtesy of haworldonline.com

Tagged , , . Bookmark the permalink.

Leave a Reply