Buy GoControl Z-Wave BR30 LED (5000K)

Facebooktwittergoogle_plusredditpinterestlinkedinmailFacebooktwittergoogle_plusredditpinterestlinkedinmail

The Bulbz indoor flood light (Model LBR30Z-1) is a Z-Wave light bulb that has the characteristics consumers want in a flood light form factor, with the added capability of remote and automation-system control. It’s a great solution for consumers who want to have ’scene’ or remote control capability on their recessed ’can’ lights or track lighting fixtures, without having to mess with any electrical wiring – it’s as simple as screwing in a bulb!

Image courtesy of haworldonline.com

Z-Wave, Zigbee, Lutron Caseta, X-10 & Insteon 220VAC High Voltage Device Control

Facebooktwittergoogle_plusredditpinterestlinkedinmailFacebooktwittergoogle_plusredditpinterestlinkedinmail

 

Z-Wave remote control & monitoring of 240VAC devices. Great for water heaters, high voltage lighting, pool pumps and appliances, motors up to 5HP

Image courtesy of haworldonline.com

Linear Z-Wave 3-Way On/Off Switch Kit

Facebooktwittergoogle_plusredditpinterestlinkedinmailFacebooktwittergoogle_plusredditpinterestlinkedinmail

The Linear Z-Wave 3-Way On/Off Switch Kit includes one primary or master on/off relay switch (load bearing) and one accessory switch (non-load bearing aka remote/slave) to allow control of one light from two different locations. Each switch replaces your current 3-way light switch, so you can use your existing wiring (neutrals are required) and provide Z-Wave wireless and manual control of overhead lighting from multiple locations.

Once connected to the load bearing switch, your lights can be turned on or off with a Z-Wave controller up to 100 feet away within line of site. The On/Off switch kit integrates with other Z-Wave enabled products via your Z-Wave controller, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range). Standard white decora Wallplates are included in each box for each model.

Image courtesy of haworldonline.com

Aeon Labs Z-Wave Dry Contact Sensor

Facebooktwittergoogle_plusredditpinterestlinkedinmailFacebooktwittergoogle_plusredditpinterestlinkedinmail

This simple sensor provides a wiring terminal to accept any dry contact sensor with wire measuring from 18AWG to 20AWG. Its perfect for adding Z-Wave communication to wired water level sensors, dry contact switches and relays, and other dry contact devices. Simply press and hold the button, insert the external sensors wires (may require stripping), and then release the button to clamp the wires.

Image courtesy of haworldonline.com

Aeon Labs Z-Wave Plus Smart Doorbell Gen5, Model ZW056-ZWUS

Facebooktwittergoogle_plusredditpinterestlinkedinmailFacebooktwittergoogle_plusredditpinterestlinkedinmail

With a Z-Wave system and Aeotec’s Doorbell, your front door is instantly smarter.

Every press of Doorbell’s outdoor button notifies your connected home that someone is at the door, allowing you to receive notifications, a chime in the home, and to activate any devices attached to your Z-Wave system.

From outside to in, Doorbell uses ultra-low powered wireless communication. There’s no wiring necessary.

Hear and see when someone is at your door via Doorbell’s LED light alerts and customisable tones.

Get smart phone notifications from your Z-Wave system anywhere in the world.

Automatically activate devices at your front door such as welcome lights and security cameras

Image courtesy of haworldonline.com

Centralite 3-Series Zigbee Temp/Humidity Sensor – Model 3310-P, 3310-G, 3310-S

Facebooktwittergoogle_plusredditpinterestlinkedinmailFacebooktwittergoogle_plusredditpinterestlinkedinmail

CentraLites new 3-Series Temperature and Humidity sensor can make your smart thermostat even smarter. Sensitive to 0.1-degrees C, the Temperature & Humidity Sensor provides the information that helps your heating and cooling system run more efficiently and keep your home more comfortable. This often results in cooler or warmer temperatures in your primary living spaces.

By placing the 3-Series Temperature & Humidity Sensor in your bedroom, your ZigBee-enabled thermostat can keep that room at the temperature you specify instead of a hallway or living room where the thermostat is installed.

Image courtesy of haworldonline.com

Aeon Labs Z-Wave Z-Stick Gen5 USB Controller

Facebooktwittergoogle_plusredditpinterestlinkedinmailFacebooktwittergoogle_plusredditpinterestlinkedinmail

Simply plug the stick into an open USB port and start adding Z-Wave devices! The stick is meant primarily to allow a host processor to control Z-Wave devices using the Z-Wave technology protocol all the while simplifying Z-Wave network installation.

Image courtesy of haworldonline.com

GE ZigBee Plug-in Smart Module 45853GE

Facebooktwittergoogle_plusredditpinterestlinkedinmailFacebooktwittergoogle_plusredditpinterestlinkedinmail

Take control of your home lighting with the plug-in ZigBee Smart Switch from GE. This unique smart switch adds remote on/off control to any table or floor lamp using your existing Zigbee hub device and does not require wiring. The ZigBee Smart Switch includes one controlled outlet and one always-on, standard outlet, and it’s space-saving, horizontal design plugs into standard receptacles without blocking the second outlet.

Works w/ Lowe’s IRIS, Wink hub, Logitech Harmony Home Hub Extender, Staples Connect, SmartThings, Best Buy PEQ, Time Warner Intelligent Home, Comcast Xfinity, Rogers Smart Home and more…

Image courtesy of haworldonline.com

Centralite 3-Series Zigbee Motion Sensor for PEQ, SmartThings Hub, and other ZHA 1.2 Certified Hubs

Facebooktwittergoogle_plusredditpinterestlinkedinmailFacebooktwittergoogle_plusredditpinterestlinkedinmail

The 3-Series Motion Detector adds both security and advanced home automation features to your connected home. You can be notified when there’s movement in a certain area and even trigger lighting scenes, HVAC settings, and security alarms based on the detection of motion. The 3-Series Motion Sensor provides virtually limitless flexibility for interacting with your home!

 

 

 

smartthings-logopeq logo

Image courtesy of haworldonline.com

X-10 Smart RF Repeater Module SR751

Facebooktwittergoogle_plusredditpinterestlinkedinmailFacebooktwittergoogle_plusredditpinterestlinkedinmail

 

This is especially useful if you are trying to cover a larger area with any sort of X10 RF signal. Items like remotes, alarm systems, and motions sensors really benefit from the RF Repeater. Any X10 unit that operates via RF Frequency can benefit from the Smart Repeater.

Image courtesy of haworldonline.com